Marine rubber fender factory sales stable performance, safe and reliable quality
Diagram of Marine rubber fender:
Marine rubber fender dimensions and properties
| SIZE | Initial pressure is 80kPa Compression deformation 60% |
| Diameter(mm) | Length (mm) | Reactionforce-kn | Energyabsorb kn-m |
| 500 | 1000 | 87 | 9 |
| 600 | 1000 | 100 | 10 |
| 700 | 1500 | 182 | 28 |
| 1000 | 1500 | 241 | 40 |
| 1000 | 2000 | 340 | 54 |
| 1200 | 2000 | 392 | 69 |
| 1350 | 2500 | 563 | 100 |
| 1500 | 3000 | 763 | 174 |
| 1700 | 3000 | 842 | 192 |
| 2000 | 3500 | 1152 | 334 |
| 2000 | 4000 | 1591 | 386 |
| 2500 | 4000 | 1817 | 700 |
| 2500 | 5500 | 2655 | 882 |
| 3000 | 5000 | 2715 | 1080 |
| 3000 | 6000 | 3107 | 1311 |
| 3300 | 4500 | 2478 | 1642 |
| 3300 | 6000 | 3654 | 2340 |
| 3300 | 6500 | 3963 | 2534 |
Beierte Fender has undergone inspection from raw material purchasing, product ordering, product production and product inspection to ensure its quality.
Large Marine rubber fender transport mode
Large Marine Rubber Fender will often encounter the problem of over-wide and over-high containers being unable to be shipped during transportation. In fact, we can release the gas on the ship's fender and then fold it, so that neither the container nor the trailer will refuse to ship or increase the high transportation cost due to over-wide and over-high. But the ship fender deflated manufacturers also need experience, can not blindly deflated
Pressure value of rubber fender on ship
1, Marine rubber fender inflation pressure is generally divided into 50 type and 80 type, namely 50kPa and 80kPa
2. The maximum burst pressure of fender is 700kPa
Marine rubber fender operating instructions and maintenance precautions
1. The maximum deformation of Marine rubber fender in the use process is 60% (except for special ship type or special operation), and the use pressure is 50kpa-80kpa (the use pressure can be determined according to the user's ship type, tonnage size and near environment).
2. The inflatable fender of the ship should be used to avoid the puncture and scratch of sharp objects; And timely maintenance and maintenance, in general 5- 6 months for a pressure test.
3. Check regularly whether the fender body is puncted or scratched. The surface objects in contact with the fender shall not have sharp protruding hard objects to prevent puncturing the fender. When the fender is in use, the cable or chain or wire rope hanging the fender shall not be knotted.
4. When the fender is not used for a long time, it should be cleaned and dried, filled with appropriate amount of gas, and placed in a dry, cool and ventilated place.
5. The fender should be kept away from heat, and should not contact with acid, alkali, grease and organic solvent.
6, do not pile up when not in use, do not pile up heavy objects on the fender.
Photos of rubber fenders on ships
Product Tags:
|
|
Dia 2500mm Length 4000mm Marine Rubber Fender DNV LR Images
|
