1.8m Diameter Marine Jacking AirBag High Pressure Marine Air Bags
Marine Airbags Introduction:
1. Some users use the Marine rubber airbag for the first time;For Marine launch airbags selection is not very professional, in this case, the user contact the air bag factory and provide the ship length, width, dead weight tonnage, slipway slope and other information, the factory will design the most cost-effective Marine air bag for the user to use according to these data
2. Lifting airbag is to use the high bearing capacity of Marine airbag to jack up the ship from the slipway, so that there is a large space between the ship and the slipway, convenient for placing launching airbag, so that the ship launches smoothly. The production requirements of lifting air bag are very strict, and the overall winding process must be adopted, and the thickness should generally reach 10 layers.
3. The integral winding process refers to the use of a single integral glue cord from the beginning to the end of the hanging cord, and no lap or stitching process is allowed; Each layer should be wound to form a cross wound with an Angle of 45 degrees.
Marine rubber airbag performance
| Diameter | Layer | Working pressure | Working height | Guaranteed bearing capacity per unit length(T/M) |
| D=1.0m | 6-8 | 0.18MPa-0.22MPa | 0.5m-0.8m | ≥13.7 |
| D=1.2m | 6-8 | 0.17MPa-0.2MPa | 0.6m-1.0m | ≥16.34 |
| D=1.5m | 6-8 | 0.16Mpa-0.18MPa | 0.7m-1.2m | ≥18 |
| D=1.8m | 6-10 | 0.15MPa-0.18MPa | 0.7m-1.5m | ≥20 |
| D=2.0m | 8-12 | 0.17MPa-0.2MPa | 0.9m-1.7m | ≥21.6 |
| D=2.5m | 8-12 | 0.16MPa-0.19MPa | 1.0m-2.0m | ≥23 |
General specifications for Marine rubber airbags
| Size | Diameter | 1.0m,1.2m,1.5m,1.8m,2.0m,2.5m,2.8m,3.0m |
| Effective Length | 8m, 10m,12m,15m,16m, 18m,20m,22m,24m,Etc. |
| Layer | 4layer,5layer,6layer,8layer,10layer,12layer |
| Remark: | According to different launching requirements, different ship types and different ship weights, the slope ratio of berth is different, and the size of Marine airbag is different. If there are special requirements, can be customized. |
The preparation work of Marine airbag before use
1. Clear and clean the sharp objects such as iron on the berth to avoid scratching the Marine airbag and causing unnecessary losses.
2. Place the Marine airbags at the bottom of the ship at a predetermined distance and inflate it. Obact the rising state of the ship and the pressure of the air bag at any time.
3. After inflating all Marine airbags, check the state of the air bags again, check whether the ship is balanced, and check whether the berth is clean and tidy.
4. The most important thing for the ship to use the air bag to launch is the stern first, and the stern first introduces the water surface; If it had gone the other way, the propeller at the back of the boat would have scraped the air bag, causing a safety accident.
Marine airbag product picture
Service tenet:
Integrity management, quality first; Create a world famous brand, do a hundred years of enterprise;
Rigorous and pragmatic, considerate; Serve every user attentively.
After-sales service:
1. All products of the company are produced in strict accordance with ISO17357:2014 standards.
2, the company's products in normal use, the life of 8-10 years.
3, the company will carry out strict inspection on each product before leaving the factory, to ensure that all products without any quality problems before leaving the factory, so that every user can rest assured with.
4, the company's product quality warranty period of 2 years, quality problems occurred during the warranty period free repair or replacement.
5. Responsible for guiding repair and maintenance process, and long-term supply of repair materials and tools.
6. Instruct or participate in the implementation and application of products to various projects.
7. Provide pre-sale, in-sale and after-sale services
Product Tags:
|
|
1.8m Diameter Jacking Marine AirBag High Pressure Marine Air Bags Images
|
